Click or Press enter to Enter to Enable skip content option
Please Select a Section to Skip to
Make an appointment with our service department today. Choose accessories to install on your favorite ride, including:
-Winches
-Plow kits
-Skid plates
-Hitches
-Heated grips
-Hand guards
Are you using the correct battery? Is it too old? Is it working properly? If you have questions about your battery, bring it in and let us do an inspection.
Whether its new, used, or just been sitting for a while, bring your ATV, UTV, dirt bike, or street bike in for a break in service. We’ll replenish the fluids, check to make sure everything is working properly and get your vehicle running smooth.
– Chain Adjustment
– Chain and Sprocket Installation
– Chain and Sprocket Adjustment
Proper chain tension is vital to drive-component longevity and peak performance. A chain adjustment ensures your chain is not too tight, which puts strain on your wheel and drive shaft, or not too loose, causing unneeded wear to your sprocket and gear.
Your chain and sprockets are constantly exposed to extreme conditions. Due to wear and tear, all chains and sprockets need to be replaced eventually. It’s always a good idea to replace your chains and sprockets at the same time. You’ll notice a difference in the way your vehicle runs, shifts, and sounds.
When your vehicle breaks down, we’ll be there for you with emergency vehicle pick-up anywhere within our service area. Call us; we’ll come out and help you.
A full engine rebuild enhances your machine’s performance. We disassemble the engine down to the bare block and rebuild it with all new components. A full rebuild includes new parts, such as gaskets, oil pumps, timing chains, gears, and belts. You’ll get remachined valves, valve seats, and crankshafts, as well as a new air filter, fuel filter, spark plugs, water pump, and all the power of a rebuilt engine.
Purge contaminated fluid with a hydraulic system flush. Regular system maintenance removes contaminants and deposits and helps extend your vehicle’s life.
Protect your investment and keep your vehicle running smoothly with regular oil changes as specified by your manufacturer. Oil lubricates, cools, and cleans your engine. An oil and filter change is an easy, affordable way to maintain your vehicle and keep it on the road and running longer.
Improve the overall operation and performance of your machine for the upcoming season. Pre-season inspection includes a fuel system, engine, oil, exhaust, and battery check. Your vehicle will leave in peak performance operation with a clean air filter and everything it needs for the season.
Promote long engine life with a cooling system flush and fill. Even in moderate climate conditions, heat and cold are hard on your engine. Clean fluid ensures that your radiator operates at optimal efficiency. It keeps your engine block at normal operating temperatures, and it lubricates expensive engine seals. Flushing the radiator prevents corrosion and costly repairs.
Is there a recall on your motorcycle, dirt bike, ATV or UTV? Not sure if good or bad? Bring your bike or off road vehicle to us and we’ll do a recall inspection to make sure the part is safe, and replace it if we need to.
Shaft drive fluid changes are quick and keep your bike or ATV running at top performance. Stop in today.
We’ll inspect your vehicle annually or semi-annually for safety and emissions. If your vehicle is not up to state standards, we’ll let you know which items need service, and we’ll fix and upgrade your vehicle right in our shop.
Protect your sled as it sits through the summer. Come into our shop and summerize your sled. We will add fuel stabilizer to your gas tank, fog the inside of your engine, spray metal protector on your metal engine components, grease your suspension and drive shaft, and completely prepare your sled for summer.
Improve the fuel economy, efficiency, and overall performance of your ride with a top engine rebuild that includes the following:
-Valves, valve seats, shims, and guides
-Piston rings
-Cylinder wall hone
-De-carbonized combustion chambers
-Replacement head and base gaskets and seals
-R&R idler guide or tensioner
-New spark plugs
Full tune-ups are available year-round on all vehicles. Keep your machine running smoothly and extend its longevity. A full tune-up includes fluid changes, lubrication, adjustments, electrical maintenance, carburetion, a safety check, an overall performance check, and everything your vehicle needs to run smoothly.
If your machine is performing poorly, starts hard, backfires, or has a noisy valve train, it may be time for a valve adjustment. The valves are timed to the piston movement via the timing chain and other components. If your valves are out of adjustment, the motor’s intake stroke, power stroke, or exhaust stroke may stop working correctly.
Winch installation affects the performance of the winch and the dredge system. A winch should be properly installed by professionals to make sure it operates at its full potential. Ensure your winch functions at peak performance; have it installed by our technicians.
A good windshield protects you from the elements while you’re out riding. Your windshield also makes your machine more streamlined and increases your speed. When you need windshield installation, come to us.
Let us prepare your vehicle for winter. We add fuel STA-BIL® to the gas tank, fog the inside of the engine, grease the suspension and drive shaft, and spray metal protector on all of your metal engine components to fully prepare your vehicle for winter.
While great effort is made to ensure the accuracy of the information on this site, errors can occur. Please verify all pricing information with a customer service representative. This is easily done by calling us or visiting us at the dealership.